 |
|
|
| |
Home > DRILL BITS >
 | AUGER WOOD DRILL BITS
Specially designed ground and shapened cutting edges.
Particulary suitable for drilling hard and soft wood, plywood and particle boards including MDF and chipboard.
Specialist screw-in point providing faster cleaner out holes.
Hexagon shank for use in most rotary drill machines and braces reducing slipping.
|
|  | FLAT WOOD BIT
Specially designed hexagon shank and forged tripoint cutting head.
300mm extension piece to be used with sizes 13mm and above.
Flat bit set consists of: 13mm, 16mm, 20mm, 22mm, 25mm, 32mm and is suited particularly to the joinery trade.
Particularly suitable for drilling hard and soft wood, plywood and particle boards including MDF and chipboard.
Twin spurs reduce the lifting of wood fibres leaving a cleaner hole.
|
|  | HARDPLATE TCT TIPPED DRILL BITS
Specially designed and ground tungsten carbide tip.
Specialist flute design enabling effective dust extraction, increasing drilling speed.
Particulary suitable for drilling stainless steel and toughened steels.
Ideal in locksmiths accessory.
|
|  | HSS FULLY GROUND METRIC STUBB DRILL BITS
Fully ground extra short.
Bulk packed in rigid boxes of tens.
DIN1897, 135 degree cutting angle.
Splitpoint from 3mm up to 6.5mm.
Stub drills are used extensively for drilling thin sheet steel, rivet holes and screw holes etc.
|
| | |  | HSS GROUND FLUTE METRIC JOBBERS IN BULK
Fully ground true Metric sizes.
Bulk packed in rigid boxes of tens and from 8.0mm up to 13mm in fives..
DIN338, type N, 135 degree cutting angle.
Splitpoint from 3mm up to 13mm.
Suitable for drilling most types of steel, iron, wood and hard plastics.
|
| |  | HSS GROUND FLUTE METRIC LONG IN BULK
Fully ground long series.
Bulk Packed in rigid boxes of tens and from 8.0mm up to 10mm in fives.
DIN340, type N, 135 degree cutting angle.
Splitpoint from 3mm and up.
Suitable for drilling most types of steel, iron, wood and hard plastics including window and door fabrications.
|
|  | HSS GROUND FLUTE METRIC LONG IN SINGLES
Fully ground long series.
Individually walleted for display purposes .
DIN340, type N, 135 degree cutting angle.
Splitpoint from 3mm and up.
Suitable for drilling most types of steel, iron, wood and hard plastics including window and door fabrications.
|
|  | HSS METRIC JOBBER DRILL BITS IN BULK
Roll forged true metric sizes.
DIN338, type N, 118 degree cutting angle.
Suitable for drilling most types of steel, iron, wood and hard plastics.
|
| |  | ROTARY MASONRY IMPACT DRILL BITS ZINC FINISH
Chrome/Nickel plated for increased durability.
Percussion carbide tip.
Reduced shank to 12.7mm from size 16mm diameter upwards.
Large range of sizes to suit most fixing requirements.
For use with percussion drills into masonry, concrete and stone.
|
|  | SDS PLUS HAMMER IMPACT DRILL BITS
Unique design double slot chuck system preventing drill seizure.
Carbide pointed tip reducing slippage on commencement of drilling.
Specialist flute design enabling effective dust extraction, increasing drilling speed.
Large range of sizes to suit most fixing requirements.
For use with SDS percussion drill machines into masonry, concrete and stone.
|
|
« Back
|
|
|
|
 |
|
|
bargainscrews,all types of screws,technical data,gift vouchers,bolts,cable & pipe clips,cavity fixings,chemical fixings,drill bits,fixing accessories,fixing plugs,gun nails,holesaws,masonry fixings,nails,nuts & washers,toolboxes,window fixings,diy packs,fire escape ladders,telescopic ladders,spiral stair kits direct from italy,power tools,hand tools,clearance bin,types of screws,machine screws sizes,fixings north west,wickes,power tools,coach screws uses,hand tools,mirror screws,screwfix
|
